20 En
When you press
OPTION
, the option menu will appear in the front panel display, allowing you to make the following settings.
(eject button) cannot be operated while the option menu is displayed.
Default setting
Procedure for settings
USEFUL FUNCTIONS

Using the Option menu

Option menu Setting or range See page
PRESET DELETE Deletes a stored preset (shown only if the audio source is DAB/FM). 15, 18
DAB INIT SCAN Performs the initial scan (shown only if the audio source is DAB). 13
DAB TUNE AID Checks the signal strength of DAB station (shown only if the audio source is DAB). 16
DIMMER Adjusts the brightness of the front panel display (*1: bright, 2: medium, 3: dim).
EQ LOW Adjusts the tonal character (low frequencies) (–10 - 0* - +10 dB).
EQ MID Adjusts the tonal character (mid frequencies) (–10 - 0* - +10 dB).
EQ HIGH Adjusts the tonal character (high frequencies) (–10 - 0* - +10 dB).
BALANCE Adjusts the volume balance of the left and right speakers (L+10 - CENTER* - R+10).
POWER SAVING Switches the system-off state.
AUTO POWER
OFF
You can specify the time after which the system will turn off automatically.
If no operation occurs for the duration you specify, the system will turn off automatically
(
TIME 12H
*: 12 hours,
TIME 8H
: 8 hours,
TIME 4H
: 4 hours,
OFF
: the system will not turn off).
CLOCK SET Sets the date and time. 6
ALARM SET Sets the alarm. 22
1Press OPTION.
The option menu will appear.
2Press / to select the menu item that you
want to set, and t hen press ENTER.
3Press / to edit the setting, and then press
ENTER to confirm the setting.
If you want to continue making other settings, repeat the
procedure from step .
4Press OPTION to exit the option menu.
If you decide to cancel without changing the setting, press
OPTION before confirming the change.
NORMAL: Show the clock
An iPod can be charged in the iPod Dock, and the alarm will operate
ECO*:
(power saving mode)
No clock display
An iPod can be charged in the iPod Dock, but the alarm will not operate
1
3
4
2
2