DISPLAY MESSAGES

Can’t Copy

You cannot make a digital recording. (See “COPY PROTECTION (SCMS)” on page 24.)

Can’t Edit

Edit operations are not possible.

Can’t Play!

Timer playback is not possible. The loaded disc may be blank, damaged, or it may be an incompatible format.

Can’t REC!

Timer recording is not possible. The loaded disc may be protected or there may not be enough blank space remaining on the disc.

Can’t REC

Recording is not possible because there is not enough blank space remaining on the disc.

DIGin Unlock

No digital signal being input to the selected digital input jack.

Disc Full

Recording is not possible because there is no blank space remaining on the disc.

Program Full

Additional steps cannot be programmed because the maximum number of steps (30) have already been programmed.

Title Full

Additional characters cannot be input for the current title because the maximum number of characters for a single title (250) have already been input.

UTOC WError

Error occurred when writing to the UTOC.

Not Audio

The inserted disc is not an audio MD.

Tr Protected

The selected track cannot be edited because it is protected.

TOC Full

The disc area allotted for TOC data has become full and further editing is not possible.

UTOC ERR L...

Problem involving UTOC data.

TMP Over!!

The temperature of the unit has exceeded the normal operating temperature. Turn off the unit and let is cool down. If the unit is installed in a place with little ventilation (such as a built in bookcase), move the unit to another location with better ventilation.

TOC Writing

The TOC data is being written to the disc. Do not move the unit or pull out the mains lead. If you do, recorded material may not be saved normally.

TOC Reading

The unit is reading the TOC data.

Protected

The record protection on the inserted MD is set to “protect”.

Playback MD

The inserted MD is a designed for playback only (you cannot record on this disc).

MONITOR OUT

The monitor out function is active. The audio signal input to the selected input terminals is output from this unit’s output terminals.

26