CONNECTIONS
Do not plug in this unit (or other components) until all other connections are complete.
•Connections should be made to the correct input/output terminals on the other component.
•Also refer to the owner’s manual supplied with the component you are connecting.
•If the placement of this unit causes noise in other equipment, such as a tuner, move them farther apart.
ANALOG CONNECTIONS
Connecting cords (included)
To AC outlet
3
PLAY
4
REC
R | L | ANALOG | DIGITAL IN | DIGITAL OUT |
LINE IN LINE OUT
4 | 3 | COAXIAL | OPTICAL | OPTICAL |
|
| |||
|
|
| 1 | 2 |
L |
|
|
|
|
R |
|
|
|
|
Amplifier/Receiver | REC PLAY |
|
Notes for analog connections
•The white plug on the connecting cables corresponds to the L (left) channel and the red plug corresponds to the R (right) channel. Be sure to connect L (left) to L and R (right) to R. Also make sure that the plugs are fully inserted and that the connection is firm.
•The LINE OUT jacks on the MD recorder should be connected to the MD PLAY jacks on your amplifier. The LINE IN jacks on the MD recorder should be connected to the MD REC jacks on your amplifier.
•The LINE OUT terminals on this unit are numbered 3 and the LINE IN jacks are numbered 4. When connecting this unit to a YAMAHA amplifier or receiver whose terminals are numbered 1, 2, 3, 4 ... (etc.), connect this unit’s LINE OUT terminals to the input terminals numbered 3 and connect this unit’s LINE IN terminals to the output terminals numbered 4 on the rear panel of the amplifier or receiver.
ENGLISH
DIGITAL CONNECTIONS
Optical fiber cable (not included)
DIGITAL OUT
OPTICAL
ANALOG
LINE IN LINE OUT
4 3
CD player (etc.) with | L |
R | |
optical OUT |
|
REC PLAY
DIGITAL OUT
COAXIAL
Coaxial cable (not included)
Satellite tuner (etc.)
with coaxial OUT
To AC outlet 
DIGITAL IN | DIGITAL OUT |
COAXIALOPTICALOPTICAL
1 2
Amplifier/Receiver
(or MD/DAT recorder) with optical IN/OUT
DIGITAL IN DIGITAL OUT
Optical fiber cable (not included) | OPTICAL | OPTICAL |
Optical fiber cable (not included)
Notes for digital connections
•The DIGITAL IN terminals can be connected to any component with an optical or coaxial output so you can make direct digital recordings.
•The DIGITAL OUT terminal can be connected to a any component with an optical input so you can output digital audio from an MD.
•Before making OPTICAL connections, remove the terminal cover(s).
•In order to protect the terminals from dust, be sure to attach the terminal covers when the optical terminals are not being used.
7