Yamaha mLAN8E - page 14

English

Settings on the device in which the mLAN8E is installed

Before the Word Clock Mode is selected or after SET is executed, this will indicate the current

Word Clock Mode. The display has the following signiﬁcance.

•

Auto(Int): Operating in Auto Mode on the internal clock

•

Auto(Ext): Operating in Auto Mode as a slave

•

---(Int): Operating in Manual Mode on the internal clock

•

---(Ext): Operating in Manual mode as a slave

[ press] SET (finalize word clock)

Finalize the selected Word Clock Mode setting.

■

Knob 4

Nickname (display only)

Displays the Nickname of the A5000/A4000.

[ press] Rename

Set the Nickname.

■

Knob 5

[ turn] MIDI Input (MIDI Input selection)

Regardless of this setting, the same MIDI output data is sent from both MIDI

OUT and mLAN MIDI.

Regardless of this setting, the MIDI THRU connector will re-transmit the data

that was input to MIDI IN.

❑

Setting

MIDI IN: MIDI messages input from the MIDI IN connectors will play the A5000/A4000; mLAN will

not be used.

mLAN->A: MIDI messages from the mLAN MIDI input will be sent to the MIDI IN-A port. MIDI mes-

sages from the rear panel MIDI IN-A connector will not be input (A5000 only).

mLAN->B: MIDI messages from the mLAN MIDI input will be sent to the MIDI IN-B port. MIDI mes-

sages from the rear panel MIDI IN-B connector will not be input (A5000 only).

mLAN: MIDI messages from the mLAN MIDI input will be input to the MIDI IN port. MIDI mes-

sages from the rear panel MIDI IN connector will not be input (A4000 only).

NOTE