5
0PHONES jack
Connect the headphones here.
You can monitor the following signals:
— Signals available for monitoring —
1. Post-EQ signal
(when the corresponding channel PFL switch is ON)
2. Pre-fader ST signal
(when the corresponding stereo L/R PFL switch is ON)
3. Pre-AUX SEND 3/4-fader signal
(when the corresponding AUX send 3/4 PFL switch is
ON)
AMONITOR control
This control adjusts the level of the signal output from the
MONITOR OUT.
BPHONES LEVEL control
The PHONES control adjusts the level of the signal sent to
the PHONES jack.
CAUX SEND 3, 4 PFL switches
Turning this switch ON will allow you to monitor the
signal output to AUX SEND 3 and 4 via the MONITOR
OUT or headphones.
DAUX SEND 3, 4 faders
These faders adjust the AUX SEND 3 and 4 output levels.
You can also use these to adjust the level of an auxiliary
output.
(+V)
(+V)
(+V)
AUX SEND 1
LEVEL
MONITOR
(ST OUT)
MONITOR
OUT +4dB
R
L
PFL
METER
3,4 +4dB
1,2 +4dB
AUX SEND
METER
(MONITOR)
(MONITOR)
METER
PFL
PFL
PFL CTRL
AUX
PFL
4
3
2
1
R
LSTEREO
R
L
STEREO OUT
+4dB
PHONES
AUX SEND
INVSUM
SUM INV
INVSUM
SUM
SUM
INV
INV
INV
SUM
SUM
INV
INV
INV