To relocate the unit, turn the power switch off, remove the power plug from the AC outlet, and remove all con- necting cables. Damaged cables may cause fire or elec- trical shock.

Turn off all musical instruments, and audio equipment when connecting to this unit. Use the correct connect- ing cables and connect as specified.

Always lower the volume control to minimum before turning on the power to this unit. A sudden blast of sound may damage your hearing.

Do not output distorted sounds for long periods of time, as this will cause the speaker to heat up, leading to a fire hazard.

Do not raise the volume of speakers to a level that makes you feel uncomfortable. Listening to loud music for long periods can damage your hearing.

If you know you will not use this unit for a long period of time, such as when going on vacation, remove the power plug from the AC outlet. Leaving it connected is a potential fire hazard.

To prevent electrical shock when cleaning the unit, remove the power plug from the AC outlet.

XLR-type connectors are wired as follows: pin 1:

ground, pin 2: hot (+), and pin 3: cold (–).

This speaker is magnetically shielded. However, if a nearby monitor displays any uneven colors, place it fur- ther away from the monitor.

Using a mobile telephone near this unit may induce noise. If noise occurs, use the telephone away from the unit.

4

Page 4
Image 4
Yamaha MSP3 owner manual