34
Remote Operation

The Multi Part Editor can be operated remotely by a hardware controller, such as the Yamaha

Digital Mixing Studio 01X. Below is an example of remote operation using the 01X, when the Multi

Part Editor is running as a plug-in under SQ01. After configuring the remote MIDI port settings,

press [REMOTE] then [MIDI] on the 01X to start the Multi Part Editor.

When starting the Multi Part Editor from the Studio Manager, press [SHIFT]+[REMOTE] to start

the Multi Part Editor.

nSet the appropriate ports required for remote operation beforehand (page 11, 31).
Part EQ SEL<Part3>
EQL-F EQL-G EQH-F EQH-G EQM-F EQM-G EQM-Q
Part1 Part2 Part3 Part4 Part5 Part6 Part7 Part8
Pan Pan Pan Pan Pan Pan Pan Pan
EQL-F EQL-G EQH-F EQH-G EQM-F EQM-G EQM-Q
Pan
L63 R63 L63 R63 CTR CTR CTR CTR
125 0.0 10.0 0.0 1.1 0.0 PEAK
Part Mixer
Window
Remote
Common Detail
Window
Part Detail
Window
Part name
Parameter name
Part being edited Parameter category
Parameter name
Parameter name
Parameter value
Parameter name
Parameter value
Remote Remote
Part Mixer
Window
Common
Detail Window
Part Detail
Window
Remote
Edit mode & NAME Mixing mode & NAME
Edit mode &
VALUE
Mixing mode &
VALUE