Setting Up
MW12 Owner’s Manual 21
English
Setting Up

Setup Procedure

1Before connecting to microphones and
instruments, be sure that all devices are
turned off. Also be sure that all of the mixer’s
channel faders and master control faders are
set all the way down.
2For each connection, connect one end of the
cable to the relevant microphone or
instrument and connect the other end to the
appropriate input jack on the mixer.
nWhere an input channel provides both a MIC INPUT
jack and a LINE INPUT jack, you may use either one
of these jacks but you may not use both at the same
time. Please connect to only one of these jacks on
each channel.
3To avoid causing damage to speakers, power
up the devices in the following order:
Peripheral devices ➞ mixer ➞ power amps (or
powered speakers).
nWhen shutting the system down, turn off the power in
the opposite order: Power amps (powered speakers)
→ mixer → peripheral devices.

Setup Examples

■Home Recording
Rhythm
Machine
Effector
Effector
Effector
Synthesizer
MTR
Guitar
Powered Monitor
Speakers
Master Recorder
(MD, CD-R, DAT, etc.)
Sound Source (CD, MD, DAT,
Cassette, Video etc.)
Personal Computer
Effector
Microphone
Headphones
USB Cable