DIP switch (SW1) settings

The MY8-mLAN has a switch that specifies whether audio input/output and MIDI input/output via mLAN will be enabled.

English

In this switch, moving the white slider toward the number will turn the setting “OFF,” and moving it toward the side marked ON will turn the setting “ON.” The following settings are assigned to each number 1–8.

Audio OUTPUT-Plug 1-8 (ON enables, OFF disables)

This specifies whether the audio output plugs will be enabled or disabled.

If this is ON, the eight audio output plugs will be enabled.

If this is OFF, the audio output plugs will be disabled.

Audio INPUT-Plug 1-8 (ON enables, OFF disables)

This specifies whether the audio input plugs will be enabled or disabled.

If this is ON, the eight audio input plugs will be enabled.

If this is OFF, the audio input plugs will be disabled.

MIDI INPUT-Plug, OUTPUT-Plug (ON enables, OFF disables)

This specifies whether the MIDI input/output plugs will be enabled or disabled. If this is ON, one MIDI output plug and one MIDI input plug will be enabled. If this is OFF, the MIDI plugs will be disabled.

– MY8-mLAN number

This specifies the number of the module name.

When you are using multiple MY8-mLAN units together, use these ON/OFF switches to specify a number that will distinguish each unit from the others. This will be reflected in the module name (e.g., “MYmLAN31”) used when you make mLAN connection settings. When you are using multiple MY8-mLAN units, there will be no problems with operation even if each unit is set to the same number. However if you assign a different number to each unit, you will be able to distinguish between units by the different module name that is displayed for each unit when controlling them from software such as “mLAN Patchbay.”

NOTE For details about mLAN connections/plugs, see page 11.

7