DIP switch settings for typical applications
■When the MY8-mLAN is installed in the Yamaha AD824
This device performs A/D conversion of analog audio input, and sends it to other devices on the mLAN bus. Thus for the MY8-mLAN installed in this device, only the audio output plugs are valid, and the audio input plugs and MIDI input/output plugs are invalid.
Set the DIP switches as follows.
1-ON, 2-OFF, 3-OFF,
4–8 may be set as desired. (However, be sure not to turn all of them OFF.)
■When the MY8-mLAN is installed in the Yamaha DA824
This device performs D/A conversion of digital audio from another device on the mLAN bus, and outputs it as analog audio. Thus for the MY8-mLAN installed in this device, only the audio input plugs are valid, and the audio output plugs and MIDI input/output plugs are invalid.
Set the DIP switches as follows.
1-OFF, 2-ON, 3-OFF,
4–8 may be set as desired. (However, be sure not to turn all of them OFF.)
■Yamaha AW4416 earlier than version 2.0 (not including 2.0)
This version does not support the MY8-mLAN. Please upgrade to version 2.0 or later.
■When the MY8-mLAN is installed in the Yamaha AW4416 version 2.0 or later
•When installed in slot 1
Slot 1 transmits/receives audio data to/from other devices on the mLAN bus. It does not trans- mit or receive MIDI data. Thus for the MY-mLAN installed in slot 1, the audio output plugs and audio input plugs are valid, and the MIDI plugs are invalid.
Set the DIP switches as follows. 1-ON, 2-ON, 3-OFF,
4–8 may be set as desired. (However, be sure not to turn all of them OFF.)
•When installed in slot 2
Slot 2 transmits/receives audio and MIDI data to/from other devices on the mLAN bus. Thus for the MY8-mLAN installed in slot 2, the audio output and input plugs as well as the MIDI input/output plugs are valid.
Set the DIP switches as follows. 1-ON, 2-ON, 3-ON,
4–8 may be set as desired. (However, be sure not to turn all of them OFF.)
■When the MY8-mLAN is installed in the Yamaha AW2816 earlier than version 1.1 (not including 1.1)
This version does not support the MY8-mLAN. Please upgrade to version 1.1 or later.
■When the MY8-mLAN is installed in the Yamaha AW2816 version 1.1 or later
This device transmits/receives audio and MIDI data to/from other devices on the mLAN bus. Thus for the MY8-mLAN installed in this device, the audio output and input plugs as well as the MIDI input/output plugs are valid.
Set the DIP switches as follows.
1-ON, 2-ON, 3-ON,
4–8 may be set as desired. (However, be sure not to turn all of them OFF.)
