Supplied Accessories

(L)(R)Screw

Wood screw

Stand (R x 2, L x 2)
(6mm) x 4(4mm) x 4
Pad x 4

ATTACHING THE STANDS

When placing the speakers, be sure to use the stands to increase stability.Note:

The provided stands are in two types. Two stands are for the right side and others are for the left side. Attach each stand to the proper position on the bottom of the speaker by following the figure below.

(L)

Back

(R)

(R) (L)FrontView from the bottom of the speakerUse the 8 specified holes located on the base of the speaker.
Procedure:

1Put the 6mm screw through the large hole on the stand, and screw it into the speaker at one of the outside holes on the base of the speaker.

At this time, screw it untightly so that the stand can still be moved.

2Put the 4mm wood screw through the other hole on the stand, and screw it into the other hole on the base of the speaker.

3Tighten both of the screws firmly.4Attach a pad to the bottom of the end portion of the stand.

5Attach the other stands to the other corners of the base of the speaker in the same way and confirm that all 4 stands have been firmly attached.

2 1

Note:

Be carefull not to apply force to the side of the speaker, otherwise the speaker may fall causing damage to the speaker or personal injury.

E-2