REMOVING THE FRONT COVER

The front cover is fastened to the enclosure at four points and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the four pegs on the inside surface of the cover with the four corresponding holes on the speaker and push gently.

Note

When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools.

SPECIFICATIONS
Type .............................

2-way bass reflex speaker system

 

magnetic shielding type

Driver ...........................................

13 cm (5") cone woofer

 

2.5 cm (1") dome tweeter

Frequency response..................................

60 Hz – 35 kHz

Nominal impedance ...............................................

6 ohms

Nominal input power ................................................

60 W

Maximum input power ...........................................

150 W

Sensitivity ................................................

87 dB/2.83 V/m

Crossover frequency ................................................

3 kHz
Dimensions (W x H x D) ... 200 mm x 320 mm x 213 mm

 

(7.9"x 12.6" x 8.4")
Weight...............................................5.5 kg (12 lbs. 2 oz.)
•Specifications subject to change without notice due to product improvements.•Care should be taken not to exceed the input power values noted above.

English

3