INSTALLATION

Before installation, check to ensure that the area you are installing the speaker is free of any ceiling joints, by tapping the ceiling or using a stud finder.

If you wish to paint the speaker frame and grill, please refer to page 7 “PAINTING THE SPEAKER FRAME AND GRILL” before proceeding.

1 Position the cutout template where you are installing the speaker. Then trace around the template with a pencil.

4 Cut the ceiling along the outline you traced.

TEMPLATE

5 Run high quality speaker cable from your

2 Drill a pilot hole in the center outline you traced. receiver to your speakers. Leave a few extra feet of cable.

3 Insert the bent coat hanger wire into the hole. Then slowly rotate to check for any obstruction. If there is any obstruction, patch the hole and select another location.

Note:

You can insulate the cavity by placing a sheet of fiberglass insulation around the speaker components to improve speaker performance.

360o

4