CONNECTIONS

zConnect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the receiver.

zConnect the (+) terminals on the receiver and speakers using the corresponding side of the cable. Connect the (–) terminals on both components using the other side of the cable.

Receiver

NS-IW360C

+ –

Notes:

zMake sure that the bare wires are not touching each other as this could damage the speaker and receiver.

zConnect one speaker to the left terminals of your receiver, and another speaker to the right terminals, making sure not to reverse the polarity (+, –). If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass.

zHow to connect

1 Loosen the knob.

2 Insert the bare wire. Remove the insulation coating at the extremity of each speaker cable by twisting the coating off.

3Tighten the knob and secure the cable. Test the firmness of the connection by pulling lightly on the cable at the terminal.

1Loosen

Black (–)

3Tighten

(–)

2

Red (+)

 

 

 

 

(+)

 

zWhen using a banana plug

1 Tighten the terminal knob.

2 Insert the banana plug into the terminal.

Banana plug

2

1

6