⬛How to connect speaker cords to the input and output terminals of the speakers
For connections, keep the speaker cords as short as possible. Do not bundle or roll up the excess part of the cords. If the connections are faulty, no sound will be heard from the speakers.
Main/center/rear speakers
One side of the provided speaker cord has a white broken line and the other side has no line.
Connect the (+) terminals on both the speaker and the amplifier using the side with a white broken line. Connect the
Red: positive (+) | White broken line |
| |
Black: negative |
|
Subwoofer (INPUT1/OUTPUT terminals)
Connect the (+) terminals on both the subwoofer and the amplifier using one side of the cord. Connect the
Red: positive (+)
Black: negative
How to Connect:
1Press and hold the terminal’s tab, as shown in the
figure.
2Insert the bare wire end properly into the terminal hole. [Remove approx. 10 mm (3/8”) insulation from the speaker cord.]
10 mm
3Release your finger from the tab to allow it to lock
securely on the cord’s wire end.
4Test the firmness of the connection by pulling lightly on the cord at the terminal.
Note
Do not let the bare speaker wires touch each other as this could damage the speaker or the amplifier, or both of them.
8
