CONNECTIONS
Connecting to the INPUT1/OUTPUT terminals of the subwoofer
For connection, keep the speaker cables as short as possible. Do not bundle or roll the excess cabling. If the connections are faulty, no sound will be heard from the subwoofer or the speakers, or both. Make sure that the + and – polarity markings of the speaker cables are observed and connected correctly. If these cables are reversed, the sound will be unnatural and lack bass.
Caution
Do not let the bare speaker wires touch each other, because this could damage the subwoofer or the amplifier, or both of them.
■Before connecting
Remove 10 mm (3/8”) of insulation from the ends of the speaker cables.
10 mm (3/8 ”)
Good | No Good |
■How to connect
1Loosen the terminal’s knob, as shown in the figure.
2Insert the bare wire.
3Release your finger from the tab to allow it to lock securely on the cable's wire end.
4Test the firmness of the connection by pulling lightly on the cable at the terminal.
Red: positive (+)
Black: negative
+
1
2
–
Plug in the subwoofer to the AC outlet
After all connections are completed, plug the subwoofer and other audio/video components into AC outlets.
To AC outlet