CONTROLS AND THEIR FUNCTIONS
OUTPUT (TO SPEAKERS) terminals
Can be used for connecting to the main speakers. Signals from the INPUT1 terminals are sent to these terminals.
(Refer to “CONNECTIONS” for details.)
INPUT1 (FROM AMPLIFIER) terminals Used to connect the subwoofer with the speaker terminals of the amplifier.
(Refer to “CONNECTIONS” for details.)
INPUT2 terminals
Used to input line level signals from the amplifier. (Refer to “CONNECTIONS” for details.)
INPUT3 (LFE) terminals
The HIGH CUT control 
has no effect on the signals inputted to these terminals. (See Page 7 for details)
PHASE switch
This switch is to be set to the REV (reverse) position. However, depending on your speaker system or listening condition, there may be a case when better sound quality is obtained by setting this switch to the NORM (normal) position. Select the best position by ear.
English