When using a banana plug

Banana plug

3

REMOVING THE FRONT COVER

English

 

The front cover is fastened to the enclosure at four points and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the four holes on the inner surface of the cover with the four corresponding pegs on the speaker and push gently.

2

1

1Remove the cover by pulling it toward you.

2 Tighten the terminal knob.

3 Simply insert the banana plug into the terminal.

Note:

When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools.

 

SPECIFICATIONS

Type ..............

2-way acoustic suspension speaker system

 

 

Magnetic shielding type

Driver ......................................

10 cm (4”) cone woofer x 2

 

 

3 cm (1”) dome tweeter

Impedance ...................................................................

6 Ω

Frequency Response ...................

60 Hz to 50 kHz (-10dB)

Nominal Input Power ...................................................

50W

Maximum Input Power .............................................

200 W

Sensitivity ..................................................

88 dB/2.83 V/m

Crossover Frequency .............................................

2.5 kHz

Dimensions (WxHxD) .........................

430 x 140 x 200 mm

 

 

(16-15/16” x 5-1/2” x 7-7/8”)

Weight ................................................

5.4kg (11 lbs.14 oz.)

●Specifications subject to change without notice due to product improvements.

●Care should be taken not to exceed the input power values noted above.

E-3