Yamaha P-140 Connections

Connections

P-140 Owner’s Manual

ENGLISH

47

Connections

Connectors

CAUTION

Before connecting the P-140 to other electronic components, turn off the power to all the components. Before turning

the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the

components may result.

1MIDI [IN] [OUT] terminals

Use MIDI cables to connect external MIDI devices to these connectors.

MIDI [IN]: Receives MIDI data.

MIDI [OUT]: Transmits MIDI data.

Refer to the “Connecting a Personal Computer” on page 49.

2SUSTAIN PEDAL Jack

This jack is for connecting an included foot pedal FC3 here.

CAUTION

Make sure that power is OFF when connecting or disconnecting the pedal.

Do not turn on the power to the unit while pressing the foot switch or foot pedal. Otherwise, the

switch or pedal type (on/off) will be reversed.

1 2 3 4

Since MIDI data that can be

transmitted or received varies

depending on the type of MIDI

device, check the “MIDI Imple-

mentation Chart” to ﬁnd out what

MIDI data and commands your

devices can transmit or receive.

The P-140’s MIDI Implementation

Chart appears on page 64.

NOTE

About MIDI

MIDI (Musical Instrument Digital Interface) is a standard format for data transmission/

reception. It enables the transfer of performance data and commands between MIDI devices

and personal computers. Using MIDI, you can control a connected MIDI device from the P-

140, or control the P-140 from a connected MIDI device or computer.

Depending upon the pedal that is

connected to the SUSTAIN

PEDAL jack, the effect produced

by operating the pedal (ON/OFF,

dynamics, etc.) might be

reversed. If this happens, refer to

the “SUSTAIN PEDAL Type” sec-

tion (page 43).

NOTE

FC3

Contents

Main ian o PLEASE KEEP THIS MANUAL WARNING: SPECIFICATIONS SUBJECT TO CHANGE: NOTICE: ENVIRONMENTAL ISSUES: PLEASE KEEP THIS MANUAL P-140 Owners Manual 1/2 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Location Do not open * Please keep this manual in a safe place for future reference. Connections Maintenance Handling caution Saving data Introduction Main Features About this Owners Manual Accessories Owners Manual Yamaha PA-5D Power Adaptor * Pedal (FC3) Music Rest Table of Contents Introduction Reference Appendix Application Index Panel Controls and Terminals Page Before Using the P-140 Tur ning the Power On 1. cable to the [DC IN 12V] jack. 2. Using the Pedals Using Headphones Music Rest Listening to the Demo Songs Demo songs are provided that effectively demonstrate each of the P-140s voices. 4 3 to stop the Voice demo. Using the 50 Piano Preset Songs Listening to the 50 Piano Preset Songs 52 5. 1. 1. to practice. 2. start playback and playing. 3. Starting playback automatically as you start playing the keyboard (Sync Start) Pedal Play/Pause Using the 50 Piano Preset Songs A-B Repeat for the 50 Preset Songs To cancel the A and B points, press the [TEMPO/FUNCTION] button once. 1. 2. ning of the phrase you want to repeat. This sets the A point ( will appear on the display). 3. time at the end of the phrase. Selecting & Playing Voices Selecting Voices 1. buttons. [OTHERS] button Pressing the [OTHERS] button switches among the fol- lowing seven voices. 1. one voice button while holding another) to engage Dual. 2. Splitting the Keyboard Range and Playing Two Different Voices (Split) 243 15 1. is called up in the display. 2. right- and left-hand range). Selecting & Playing Voices 3. to normal play. 4. 5. Adding Variations to the Sound [VARIATION] [VARIATION] Selecting a Reverb/Effect type [REVERB]/[EFFECT] [REVERB] [EFFECT] Touch Sensitivity [TOUCH] [TOUCH] Transposition [TRANSPOSE] Using the Metronome nome. 1. nome. 2. 12[/NO] [+/YES] buttons Recording Your Performance Recording a performance quickly 1. will be using Dual or Split), before you begin to record. 2 4 43 5 1 2. mode. 3. 4. ing. 1. recording, if necessary. 2. Ready mode. Recording to RIGHT/LEFT 1. 2. 3. 4. 23 23 1 The user song recorder records the following data: Changing the Initial Settings (data recorded at the beginning of a song) 1. Record mode and select a part to change the initial settings. 2. controls. 3. Playing Back Songs The following three types of songs are available. 50 Piano Preset Songs User songs in the instrument External songs in the instrument SMF (Standard MIDI File) Formats 0 and 1 3. 4. stop playback. Turning part playback on and off Detailed Settings [FUNCTION] Detailed Settings [FUNCTION] Function Sub-function Display Reference page Fine tuning of the pitch Selecting a scale Dual functions Split functions Other Functions 1. ton to enter the Function. 2. the desired function from F1F9. 3. 5. 6. Press the [TEMPO/FUNCTION] to exit the Function. About Each Function F1. Fine Tuning of the Pitch Using the keyboard to set the pitch F2.2: Base Note F2. Selecting a Scale F3. Dual Functions F4. Split Functions F5.2 Soft Pedal Effect Depth F5.3 Sustain Sample Depth F5.4 Keyoff Sample Volume F5.5 Song Channel Selection F5. Other Functions Use this function to adjust the metronome vol- ume. F8.2: MIDI Receive Channel Selection F8.3: Local Control ON/OFF F6. Metronome Volume F7. Song Part Cancel Volume F8. MIDI Functions F8.4: Program Change ON/OFF F8.5: Control Change ON/OFF F8.6: Panel/Status Transmit F8.7: Initial Setup Send F9. Backup Functions Connections Connectors 1MIDI [IN] [OUT] terminals 2SUSTAIN PEDAL Jack 3AUX PEDAL Jack 4AUX OUT [R] [L] Pin jacks (LEVEL FIXED) Connecting a Personal Computer Using a MIDI interface and the P-140s MIDI terminals Data Backup Using a Computer Data that can be saved Panel settings and recorded User songs External songs received via computer. 1. Message List Troubleshooting Troubleshooting Optional Equipment Foot Pedal (FC3/FC4/FC5/FC7) Keyboard Stand (L-140/L-140S) Problem Possible Cause and Solution Preset Voice List Preset Voice List Stereo Touch Response Dynamic Key-Off Split Left Voice List Index R S T V Page Appendix No. Title Composer Function Default Backup Group Display Function Default Backup Group MIDI Data Format / MIDI-Datenformat / Format des donnes MIDI / Formato de datos MIDI 1. NOTE ON/OFF Data format: [9nH] -> [kk] -> [vv] Data format: [8nH] -> [kk] -> [vv] (reception only) 2. CONTROL CHANGE P-140 Owners Manual / Bedienungsanleitung / Mode demploi / Manual de instrucciones 61 4. PROGRAM CHANGE Data format: [CnH] -> [ppH] SPLIT VOICE 5. PITCH BEND CHANGE 9. SYSTEM EXCLUSIVE MESSAGES (XG Standard) ll Data format: Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] -> [mmH] -> [llH] -> [ddH] ->...-> [F7H] 10.SYSTEM EXCLUSIVE MESSAGES (P-140 MIDI Format) Effect MIDI Map MIDI Implementation Chart Specications / Technische Daten / Caractristiques techniques / Especicaciones FCC INFORMATION (U.S.A.) CANADA U.S.A. MEXICO BRAZIL NORTH AMERICA CENTRAL & SOUTH AMERICA EUROPE AFRICA MIDDLE EAST ASIA