MIDI Data Format / MIDI-Datenformat/ Format des donées MIDI/Formato de datos MIDIiii[Panel Data Contents]
(1) ABC ON/OFF
(2) SSP ON/OFF
(3) SSP NO.
(4) MANUAL VOICE
(5) MANUAL VOLUME
(6) RHYTHM NO.
(7) RHYTHM VARIATION
(8) TEMPO (Absolute value LSB)
(9) TEMPO (Absolute value MSB)
(10) RHYTHM VOLUME
(11) CHORD 1 VOLUME
(12) CHORD 2 VOLUME
(13) BASS VOLUME
(14) SPLIT POINT
(15) DUAL/SPLIT MODE
(16) DUAL/SPLIT VOICE
(17) DUAL/SPLIT BALANCE
(18) REVERB
(19) REVERB DEPTH
(20) FOOT SWITCH FUNCTION
(21) VOICE BANK (Upper 4 bits)
(22) INTRO
Individual Key Tuning Data Bulk Dump
Format
F0H, 43H
73H, 34H (Product ID)
06H (Bulk ID)
00H (Bulk No.)
00H, 00H, 0bH, 00H (Data Length= wxyH
88*2 bytes)
[BULK DATA] (low (A-1), high (A-1)
...low (C7), high (C7))
[CHECK SUM (1byte)]= 0-sum
(BULK DATA)
• PDP-400 MIDI Format
[F0H] [43H] [73H] [34H] [xxH] [F7H]
43H= YAMAHA ID
73H ]= Product ID
34H
xxH= Substatus
xxH Information
02H Internal MIDI clock
03H External MIDI clock
13H Multi-timbre mode off
14H
DOC Common Voice mode on
15H Multi-timbre mode on
18H
DOC Common Voice
mode
individual track reverb depth on
7nH All Note Off,
Receive Channel = n+1, Omni off
* When nn = 2, 3, 13, 14, 15, 18, or 7C,
PDP common ID (73H, 01H) is recog-
nized as well as 73H, 34H.
* All Control Change values are reset when
[13H], [14H] or [15H] is received. All
voices and other parameters are also
reset when [14H] or [15H] is received in
order to ensure the same initial settings.
• Special Messages
[F0H] [43H] [73H] [34H] [11H] [0nH]
[ccH] [vvH] [F7H]
43H= YAMAHA ID
73H ]= Product ID
34H
11H= PDP Special Control Code
0nH= Control MIDI Change
(n= special control change number)
ccH= Control number
ddH= Control value
cc Control Value [dd]
08H DUAL/SPLIT 00H= lower MAX
Balance 7FH= upper MAX
10H ABC Mode 00H= Off
01H= ABC Single
Finger
02H= ABC Fingered
03H= Conventional
Full-Keyboard
ABC
04H= Full-Keyboard
ABC
11H
Rhythm Variation
00H= Off
01H=
Variation number
12H Fill In Switch 00H=Fill to normal
Event Off event
01H= Fill to normal
On event
02H= Fill to variation
On event
03H= Fill to variation
Off event
13H Intro/Ending 00H=
Intro mode Off
Switch Event 01H= Intro mode On
02H=
Ending mode On
03H= Fill to normal
mode On
04H= Fill to variation
mode On
14H Split [ddH]= Split key
number (the highest
note in the left-hand
keyboard range)
15H
Rhythm Number
[ddH]=
Rhythm number
19H Volume [ddH]= Volume value
n=2 (BASS)
4 (CHORD 1)
5 (CHORD 2)
1AH
Rhythm Volume
[ddH]= Volume value
1BH
Metronome mode
00H: Off
(receive only)
01H: On
21H Solo Styleplay 00~17H=Style
Number number
22H Solo Styleplay 00H~3FH= Off
40H~7FH= On
30H Drums Parameter Change
See Drum Parameter Expanded
Format, below
59H Reverb 00H= Off
01H= Room
02H= Hall 1
03H= Hall 2
04H= Cosmic
5AH
Dual/Split mode
00H= Off
01H= Dual
02H= Split
(upper damper)
03H= Split
(lower damper)
04H= Split
(upper/lower
damper)
05H= Split & Lower
Voice Oct Up (upper
damper)
06H= Split & Lower
Voice Oct Up (lower
damper)
07H= SPLIT & Lower
Voice Oct Up (upper/
lower damper)
5CH
Dual/Split Voice
[ddH]=
Dual/Split voice
number
5DH Foot Switch [ddH]= Function
Function number
* When cc = 59 (Reverb), PDP common ID
(73H, 01H) is recognized in addition to
73H, 34H.
Drum Parameter Expanded Format
[F0H] [43H] [73H] [34H] [11H] [0nH]
[30H] [34H] .....[F7H]
73H, 34H: Product ID;
01H is recognized in addition to 34H.
0x30: /* Drum Parameter */ *2 Expanded
Format
* This resets all parameters when a differ-
ent drum kit is selected.
Expands Special Message 30.
• Effect Level
[F0H] [43H] [73H] [34H] [11H] [0nH]
[30H] [43H] [knH] [enH] [slH] [F7H]
11H: PDP special control code
0nH: MIDI Channel Number
* Received only on channel 15 (0EH) in
the PDP-400, affecting all tracks.
Received only on channel 10 (09H) n
the GM mode, affecting all tracks.
30H: Drums Parameter Change
43H: Effect Send Level
knH: Key Number
* Also included in the panel key code in
the DOC Common Voice mode (be-
cause conversion is not possible). In-
cluded in the GM key code in the GM
mode.
* When kn = 01 the en for all keys is set to
the default.
When kn = 02 the en for all keys is set to
s1.
enH: Effect Number
en= 5B: Reverb Depth
slH: Send Level
* This data applies a ± 40H offset to the
CH depth parameter of each channel of
each instrument.