Specifications

Bluetooth version.....................................................................................................

Ver. 2.1+EDR

Supported profile.....................................................................................................

A2DP

Before use

Supplied accessory
Connect the included AC adaptor.

Bluetooth connection for playing music

This unit enables you to enjoy music playback wirelessly with a Bluetooth component (such as a mobile phone, digital music player, etc.) which is paired (registered) and has established Bluetooth connection with this unit.

Supported audio codec.............................................................................................

SBC, AAC

RF output power......................................................................................................

Bluetooth Class 2

Maximum communications range...........................................................................

10 m (33 ft) without interference

AUX Input connector..............................................................................................

ø 3.5 mm (1/8 in.) stereo mini jack

Power voltage/Frequency

 

U.S.A. and Canada models...................................................................................

AC 120 V, 60 Hz

Other models........................................................................................................

AC 100–240 V, 50/60 Hz

Power consumption.................................................................................................

8 W (speaker)

Power consumption when power off and Bluetooth disconnected..........................

0.5 W or less
Please confirm that the following accessory is included before using the unit.• AC adaptor

B

A

12V ---

Connect the AC adaptor to PDX-B11, before connecting the power cable to the wall outlet.

When using PDX-B11 with batteries, disconnect the AC adaptor from the rear panel.

Installation
Install in a stable place, being careful of the following points:

•Do not place on top of steel or other metal plates.

•Do not cover with a cloth, etc.

•Install in the same room as the device with which signals are to be exchanged (Bluetooth profile A2DP compatible portable music player, mobile phone, etc.) within a direct, line-of-sight distance of 10 m (33 ft).

•Make sure there are no obstacles between this unit and the Bluetooth component.

4Select “PDX-B11 Yamaha” from the list of the other component.5If you are prompted for input a passkey, input thenumber .6Check that pairing is completed.

• Check that the pairing process on the other component has been

completed. If the pairing process fails, start over from step 3.
• If the power supply to this unit is cut off during the pairing
operation, the pairing data may be damaged. If so, perform the
AC Adaptor

 

 

 

 

 

 

 

 

Australia model....................................................................................................

 

 

 

 

 

 

MU18-D120150-A3 (DC 12 V, 1.5 A)

U.K. model...........................................................................................................

 

 

 

 

 

 

MU18-D120150-B2 (DC 12 V, 1.5 A)

Battery supply..........................................................................................................

 

 

 

 

 

 

LR6, AA, UM-3 × 6

Battery life...............................................................................................................

 

 

 

 

 

 

8 hours of power at 0.18 W output (Alkaline Battery)

Weight.....................................................................................................................

 

 

 

 

 

 

1.5 kg (3.3 lbs)
Dimensions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

210 mm

 

 

 

 

 

 

237 mm

 

 

 

 

 

 

 

(8-1/4in.)

 

 

 

 

 

 

(9-3/8in.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When operating PDX-B11 using batteries

A B C

Use 6 commercially available AA batteries.
To remove the battery cover, push theFollow the + and – markings on

Replace the battery cover.

tab while lifting the cover upward.PDX-B11 when inserting the batteries.

 

Within 10 m (33 ft)
Power (Power on/off)
Press (power) to turn this unit on.The status indicator (Green) lights up when the unit is powered on.Auto power on

The unit powers on automatically when a connected Bluetooth device is played at a loud volume.

procedure described at “Clearing all the pairing data” and then

perform pairing again.
• This unit can be paired with up to 8 other components. When

pairing is conducted successfully with a 9th component and the

pairing data is registered, the pairing data for the least recently

used other component is cleared.
Bluetooth connection and playback

1

Press

 

(power) to turn this unit on.

 

2

Operate the paired other component to establish

 

Bluetooth connection.

 

The status indicator (Blue) stops blinking and stays on when

 

Bluetooth connection is completed.

 

• You can omit this operation if the other component can be connected

240 mm (9-1/2in.)

*Specifications are subject to change without notice.

*The name plate is located on the bottom of the unit.

Bluetooth

••Bluetooth is a technology for wireless communication between devices within an area of about 10 meters (33 ft) employing the 2.4 GHz frequency band, a band which can be used without a license.

••Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement.

Handling Bluetooth communications
Bluetooth Speaker System

 

• The 2.4 GHz band used by Bluetooth compatible devices is a radio band shared by many types of equipment.

 

While Bluetooth compatible devices use a technology minimizing the influence of other components using the same radio band, such influence may reduce

 

 

the speed or distance of communications and in some cases interrupt communications.

 

 

• The speed of signal transfer and the distance at which communication is possible differs according to the distance between the communicating devices, the

Owner's manual

presence of obstacles, radio wave conditions and the type of equipment.

 

 

• Yamaha does not guarantee all wireless connections between this unit and devices compatible with function.

 

 

Features
Wireless music streaming via Bluetooth
Simple, automatic connection
Multi-Source Mix (Bluetooth, AUX-in)
Portable use and battery operation

Printed in China ZE06490

Controls and functions

Connecting an external deviceAUXHandle

1 Connect a (commercially available) 3.5 mm (1/8 in.) stereo mini plug cable to the AUX on the rear panel.

2 Power on the unit.3 Play back the AUX source.

Multi-Source Mix Audio will be mixed when AUX source is played while playing music via Bluetooth connection.

Control panel

Bluetooth… for switching Bluetooth components. (Default is Auto Connection. ☞ 3 En)

 

Power

 

on/off

Volume

Volume

−

+

Status indicator

Status indicator

(Green)

(Blue)

Press and hold (power) for more than 3 seconds to power off the unit and then enter power-saving mode.

Bluetooth connection is not available while in power-saving mode. To perform Bluetooth connection, press (power) on the unit to cancel power-saving mode.

Auto power on is not available if the unit is powered by batteries.Auto power offThe unit powers off automatically in the following cases:-When an external component is not connected

••Bluetooth connection is established but there has been no playback for more than 30 minutes.

••Bluetooth is disconnected by operating the other component.-When Bluetooth connection is not established•The external component is not connected for more than 30 minutes.•The external component’s cable is disconnected from the unit.
Pairing (Registration)

Pairing must be performed when using Bluetooth connection for the first time or if pairing data has been deleted.

What is pairing…?

Refer to the operation of registering mobile phones, etc., for Bluetooth communications (hereafter referred to as “other components”). Follow the procedure described below to pair.

Paring procedure1 Press (power) to turn this unit on.2Turn on the power of the other component you want to pair with.3-a [For components with input keys (mobile phones, computers, etc.)]

Operate the other component to detect Bluetooth components.

For details, refer to the other component’s operating instructions.

3-b [For components without input keys (Bluetooth adaptors, etc.)]

Set the other component to the pairing mode and then proceed to step 6.

For details, refer to the other component’s operating instructions.

automatically while pairing.

• The unit and the other component are connected automatically, if

the component is latest recently connected one. (Auto Connection)

Note

Auto Connection may not be available depending on the other component. Operate other component if Auto Connection is not available.

3Start playback of the other component.4Adjust the volume level using / (volume).
Disconnect Bluetooth
aPress (Bluetooth) on the unit.bOperate the other component to disconnect Bluetooth.How to switch a connected Bluetooth component1 Press (Bluetooth) on the unit to be disconnected.(The unit enters Waiting Status.)2Establish Bluetooth connection.

(Perform pairing procedure if this is the first Bluetooth connection with the new component.)

Clearing all the pairing data

1 Press (power) to turn this unit on.

2 Press and hold (Bluetooth) on the unit for more than 10 seconds.All the paring data on the unit is cleared.
1 En2 En3 En