PF-500 51
Connections

Connectors

CAUTION
Before connecting the PF-500 to other electronic components, turn off the power to all the components. Before
turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or
damage to the components may occur.
The PF-500’s [MASTER
VOLUME] dial setting affects
the input signal from the AUX
IN jacks, but the [REVERB],
[CHORUS], and BRIL-
LIANCE [MELLOW]
[BRIGHT] (page 28) settings
do not.
If you connect the PF-500 to
a monaural device, use only
the AUX IN [L/L+R] jack or
AUX OUT [L/L+R] jack.
1AUX IN [R], [L/L+R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the PF-
500’s speakers. Refer to the diagram below and use audio cables for connec-
tion.
CAUTION
When the PF-500’s AUX IN jacks are connected to an external device, first turn
on the power to the external divice, then to the PF-500. Reverse this order when
you turn the power off.
AUX PEDALAC INLET
AUX IN
R
L/L+R
MIDI
IN THRUOUT
PEDAL TO HOST USB
HOST SELECT
MIDIPC-2 USBMac
PHONES
ON OFF
POWER
RL R
L/L+R
AUX OUT
LEVEL FIXED
4 5 7 8 9
123
6
TIP
TIP
AUX IN
phone plug
(standard)
audio cable
Plug shape depends
on the divece.
AUX OUT
Tone Generator
PF-500
AUX IN
R
L/L+R