STEP 6 • Record Your Performance
PSR-450 Owner’s Manual 35
Quick Guide
Step 1-2. Press the [A] button while holding the [REC] button.
will flash in the display.
●To Record Only a Melody Track
Press the track button of the melody track you want to record (1 ~ 5) while
holding the [REC] button. The number of the selected track will flash in the
display.
2Start recording.
Recording will begin when you start playing on the keyboard. You can also
start recording by pressing the [START/STOP] button.
The current measure number will be shown in the display during recording.
3Stop recording.
Stop recording either by pressing the [START/STOP] button or the [REC]
button.
If you press the [INTRO/ENDING/rit.] button while recording the style
track the ending section will play through and then recording will stop
automatically.
When recording finishes the current measure will return to measure number 001
and the number of the recorded track will appear continuously in the display.
●To Record a New Track
Repeat steps 2 through 4 to record additional tracks.
By pressing the SONG MEMORY [1] ~ [5] and [A] buttons you can monitor
playback of recorded tracks (the track numbers will appear continuously in
the display) while recording additional tracks. You can also mute recorded
tracks (the track numbers will disappear) while recording additional tracks.
●To Re-record a Track
Select the track you want to re-record for recording in the normal way.
The new recording will overwrite any previous data in the track.
4Save important data to floppy disk (see page 54).
User 2
rEC
•When the style track is selected for
recording accompaniment is auto-
matically turned on.
• Accompaniment cannot be turned
on or off once recording has
started.
• If a split voice is selected for
recording notes lower that the split
point will not record.
NOTE
•If accompaniment is turned on and
the style track has not been
recorded, the style track will auto-
matically be selected for recording
when a melody track is selected. In
this case you will need to turn the
style track off if you want to record
only a melody track.
•To cancel recording press the track
button corresponding to the flash-
ing track number in the display so
that the flashing track number dis-
appears.
NOTE
• If power to the instrument is
shut off for any of the reasons
listed below during recording, all
data in the song being recorded
will be lost.
• The [STANDBY/ON] switch is
pressed.
• The AC power adaptor is
unplugged when no batteries
are installed in the instru-
ment.
• The batteries become
depleted.
CAUTION
or
• If the AC adaptor is unplugged
and the batteries are removed
after turning the power off, all
user song data will be lost. Be
sure to save all data you want to
keep to floppy disk to prevent
loss due to accidental erasure.
CAUTION