111
Revoicing
2If Necessary Select a Voice to Revoice
Use the three rightmost TRACK buttons to select the voice you want to
revoice: L, R2, or R1. The selected tracks will be bracketed by two horizontal bars.
• The TRACK button below
the selected voice can be
used to turn the voice on or
off. Make sure that the
voice is turned on if you
want to monitor the sound
while revoicing (the R1
voice cannot be turned off).
3Select and Edit the Revoice Parameters
Use the SUB MENU [▲] and [▼] buttons to select the desired parameter. The
name of the selected parameter will appear on the top line of the display to the
right of the parameter’s current value. Use the [–] and [+] buttons, the number
buttons, or the data dial to set the parameter’s value as required. Refer to the
“Revoice Parameters” chart on page 111.
• You can jump directly to the
REVOICE R2 VOICE dis-
play by pressing and hold-
ing the [DUAL VOICE] but-
ton for a few seconds.
• You can jump directly to the
REVOICE L VOICE display
by pressing and holding the
[SPLIT VOICE] button for a
few seconds.
4Repeat as Required and Exit When Done
Repeat steps 2 and 3, above, to revoice the voices as required, then press the
[REVOICE] button so that its indicator goes out to exit from the REVOICE
mode.
• Minus settings for the Oc-
tave and Pan parameters
can be directly entered by
pressing the appropriate
number button while hold-
ing the [–] button.
• When the DSP type is set
as insertion, the DSP depth
parameter cannot be
changed.
• The REVOICE mode will
automatically be exited if
the MENU [
▲
] and [
▼
] but-
tons are used to select any
of the menus to the left of
the display.
• Save any revoice settings
you want to keep to the
PSR-730/630 REGISTRA-
TION MEMORY (page 57).
The revoice setting are tem-
porary and will be lost if the
power is turned off, a differ-
ent R1 panel voice is se-
lected while the Voice Set
function is on, or a REGIS-
TRATION MEMORY is re-
called.
VOICEVOICEVOICE
LR1R2
14 15 16
DUALSPLIT
001109084
LR2 R1
1614 15 16
nd Piano001 GraR1Voice:
: 100R1Volume
: 0R1Octave
: 0R1Pan:
th: 28R1RevDep
th: 70R1ChoDep
th: 26R1DspDep
REVOICE