ENGLISH
Do not turn the POWER switch OFF and ON in rapid succession. Wait at least 5 seconds before turning the POWER switch ON after it has been turned OFF. The device to which power is being supplied
may not operate properly in some cases.
Precautions for Rack Mounting
If this device is to be rack mounted and transported frequently – such as in touring
applications – be sure to support the rear end of the unit with mounting hardware that has been
made to match the size of the rack used. Refer to the diagram on the right when preparing the
mounting brackets. Please note, however, that only one of the required pair of brackets is
shown in the diagram. You will need to two symmetrical brackets to support the device.
The PW800W has been specifically designed for use with Yamaha professional audio equipment. The PW800W cannot be used with devices having incompatible power ratings, connectors, etc.
Refer to the owner’s manual supplied with your device to determine if it is compatible with the PW800W.
Use the cable supplied with the device to be connected to connect the PW800W to your device. Use the optional PSL360 Power Supply Link Cable to connect the M7CL.
When parallel-connecting two PW800W units use the optional PSL120 Power Supply Link Cable to connect the second PW800W to the main PW800W unit.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed.
Always turn the power off when the device is not in use.
The performance of components with moving contacts, such as switches, and connectors, deteriorates over time. Consult qualified Yamaha service personnel about replacing defective components.
86.5
20.5
3.1
4-ø6.5
2-R2
R2
2-R2
R5
t = 1.6
(82.1)
76.2
44.45
31.75
5.9
0
36.5
14.5
7.5
8
0
12
134
200
0
5