ENGLISH
Controls and Connectors
■
Front Panel
1
POWER ON/OFF Switch/ POWER Indicator
POWER ON/OFF Switch
The PW800W supplies power to the connected device when
this switch is ON.
PW800W Power-on Procedure
1.
Make sure that the PW800W power switch is OFF.
2.
Connect the PW800W to the device to be powered using the
cable supplied with the device (or PSL360).
3.
Plug the PW800W power cord into an appropriate AC
outlet.
4.
Turn the POWER switch ON.
Be sure to turn the POWER switch OFF before
connecting the PW800W to the device to be powered.
Connecting the power supply to the device to be powered
while the POWER switch is ON can damage the device.
POWER Indicator
The POWER indicator will light when the PW800W is
supplying power to the connected device.
Never obstruct the cooling vents located on the front and
rear panels of the PW800W.
■
Rear Panel
2
DC OUTPUT Connector
This connector supplies power from the PW800W to the
connected device. When using parallel-connected
PW800W units, this connector connects to the DC
PARALLEL INPUT connector on the main PW800W
unit.
Always use the cable supplied with the device to be
connected to connect the PW800W to your device. Use
the optional PSL360 Power Supply Link Cable
toconnect the M7CL. A second PW800W should be
parallel-connected to the main PW800W only using the
optional PSL120 Power Supply Link Cable. Rotate the
connector ring to the right to connect, or to the left to
disconnect.
1
n
Although the POWER indicator will light when the POWER
switch is on while the powered device and PW800W are
properly connected, please note that the indicator won’t light if
the powered device and PW800W are not properly connected or
a fault in the PW800W results in failure to output the required
24 volts DC.
4
32
5
6