12
4: Playing the Patterns & Their Variations (continued)
2Turn ON or OFF
Use the [+1] key to turn the FOOT SW function
“on”, or the [–1] key to turn it off (“,F” on the
display).
CAUTION
Do not use a footswitch when
the FOOT SW function is turned off! If
a footswitch is connected to the INPUT
jack and the footswitch function is
turned OFF, operating the footswitch
may cause damage to the QR10.
IMPORTANT
The sound of an instrument or
other external audio source will not
be heard via the QR10 speaker when the
FOOT SW function is turned on.
Connecting an instrument or audio
source to the INPUT jack when the FOOT
SW function is turned on may actually
damage the connected device.
3Exit
Press the [EXIT] key when done.
Using the Pattern Variations
Each preset pattern has 6 variations or “sections” — INTRO, NORMAL, VARIATION, FILL 1, FILL 2, and ENDING.
INTRO................... introduction.
NORMAL.............. normal pattern, used for the “verse” of a song.
VARIATION ........ normally used as a chorus or bridge.
FILL 1 ................... fill-in 1, transition (from normal) to variation.
FILL 2 ................... fill-in 2, transition (from variation) to normal.
ENDING................ ending pattern.
When the INTRO, FILL 1, and FILL 2 sections
are selected, the section plays through once and is
automatically followed by either the NORMAL or
VARIATION pattern. INTRO is followed by
NORMAL, FILL 1 is followed by VARIATION and
FILL 2 is followed by NORMAL. The FILL 1 and
FILL 2 patterns automatically provide smooth,
“musical” transitions between the NORMAL and VARIATION sections. Playback stops automatically after the ENDING
section.
The fill-ins — FILL 1 and FILL 2 — will play repeatedly as long as the button is held.
The currently selected section is shown in the
“SECTION” area of the display.
Start
FILL 1 FILL 2
VARIATION
NORMALINTRO
ENDING Stop
Section Area