42
8: Recording Original Patterns (continued)
5Press [START/STOP] to Copy
Press the [START/STOP] key to actually copy the source pattern to the specified destination pattern number, or [EXIT] to
exit from the COPY function.
IMPORTANT
Any previous data in the destination pattern location will be erased and replaced by the
source pattern when the copy function is executed.
DETAIL
If the QR10 memory becomes full due to a copy operation, the memory full error display β βERR
3β β will appear. If this happens, use the pattern clear (page 40) and song clear (page 34)
functions as necessary to erase unwanted data to make room for the data to be copied.