160 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
9Utility Functions
The “System” display includes 6 parameters that affect the basic op-
eration of the QY22. Move the cursor to the parameter to be adjusted and
set as required by using the [−1] and [+1] keys.
System Parameters—————————————————————————MIDI Sync
(MIDI synchronization mode)
Settings: Int, Ext
When this parameter is set to “Int” the QY22 is controlled by its own
internal clock.
When set to “Ext” the QY22 is controlled by a MIDI clock signal re-
ceived from an external device such as a sequencer or music computer.
Please note that the QY22 will not run on its own when this parameter is
set to “Ext.”
This parameter simply turns MIDI control of the QY22 on or off.
“On” is the normal setting, and with this setting the QY22 receives note,
program change, and control change data from an external MIDI key-
board or other controlling device. Transmission of start, stop, and con-
tinue commands is also active, as is MIDI clock transmission.
When set to “Off” the QY22 will not respond to external MIDI control
(start, stop, and continue commands only).
If the QY22 is to be used as a General MIDI tone generator, the MIDI
control parameter should be set to “Off”.
MIDI Ctl
(MIDI control)
Settings: On, Off