28 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
–1+1
NO YES
These keys are used to edit (change the value of) the parameter at
which the cursor is currently located. The [−1/NO] key decrements
(decreases stepwise) the value of the selected parameter, while the
[+1/YES] key increments (increases stepwise) the parameter. Press
either key briefly to decrement or increment the parameter by one, or
hold the key for continuous decrementing of incrementing in the
specified direction.
The [−1/NO] and [+1/YES] keys are also used to respond to “Are
you sure?” prompts when they appear. Press [+1/YES] to go ahead
with the operation, or [−1/NO] to cancel.
HINT
For even faster decrementing or incrementing, press the opposite incre-
ment/decrement key while holding the key corresponding to the direction
you want to increment/decrement in.
Try This: Select the SONG mode display (use the [MODE] key,
as described above), use the cursor keys to select the
transpose parameter (“Trns” on the display), then try
using the [−1/NO] and [+1/YES] keys to change its
value. Set it back to “+00” before continuing.
3Getting to Know the QY22: How the Controls Work
5[−1/NO] and [+1/YES]
Keys
m
This is the transpose
parameter.
Use
–1+1
NO YES
to set.