Yamaha R-302 PRESET TUNING, MANUAL PRESET TUNING, To store stations, To recall a preset station

PRESET TUNING

MANUAL PRESET TUNING

This unit can store station frequencies (selected by tuning operation) by using the PRESET STATIONS buttons. With this function, you can recall any desired station by only pressing the corresponding PRESET STATIONS button. Up to 40 stations (8 stations x 5 groups) can be stored.

2, 1

	TUNER	CD
POWER	TAPE
	MONITOR AUX	PHONO

											PRESET STATIONS							4, 2
										A/B/C/D/E 1		2	3	4
															VOLUME
				TUNING MODE FM/AM DOWN			TUNING	UP	EDIT MEMORY						l8	l6	l4
	3										5	6	7	8	20		l2
				AUTO/MAN'L MONO						MAN'L/AUTO FM					28 24		l0 8
															34		6
						BASS	TREBLE			BALANCE			LOUDNESS		40		4
			PHONES	SPEAKERS	l	0 l	l	0 l		l	0 l		l FLAT		50		3
				A B	2	2	2		2	2	2		2	I0	60		2
					34	43	34		43	34	43		34	89	70	–dB	0 l
					5	5	5	5		L 5	5 R		5 6	7
To store stations										To recall a preset station
1 Tune to a desired station.										1 Select the group of preset stations.
(Refer to the previous page for tuning procedure.)
2 Select a desired group (A – E) of preset stations											A/B/C/D/E
																				PRESET
confirming it on the display.
A/B/C/D/E
				PRESET
										2 Select the preset station number.
3 MEMORY																		PRESET STATIONS
																	1	2	3	4
FM				MEMORY														6	7	8
			Flashes on and off for
			about 5 seconds.
4 Select a preset station number where you want to																		PRESET
program the station before “MEMORY” goes off from the
display.
	PRESET STATIONS
1	2	3	4
	6	7	8							Notes
										●	A new setting can be programmed in place of the former
											one.
										●	For presets, the setting of the reception mode (stereo or
											monaural) is stored along with the station frequency.
PRESET
FM			MHz 0 20 40 60	l00						Memory back-up
										The memory back-up circuit prevents the programmed data
Shows the displayed station has been programmed to A1.										from being lost even if the POWER switch is set off or the
										power plug is disconnected from the AC outlet or the power is
* In the same way, program other stations to A2, A3 ... A8.										cut due to temporary power failure. If, however, the power is
										cut for more than one week, the memory may be erased. If
* You can program more stations to preset station numbers
										so, it can be re-programmed by simply following the PRESET
on other groups in the same way by selecting other										TUNING steps.
groups in step 2.

16