1, 4
2
1 Select the source to be recorded.
MONITORINPUT
VCR TAPE LD/TV TUNER CD PHONO
COPY
*To dub from tape to tape, refer to the “Notes” shown at right.
*When you select LD/TV, TUNER, CD or PHONO, make sure that neither TAPE nor VCR is also selected.
2 Play the source and then turn the VOLUME control
up to confirm the input source. (For detailed information on the tuning operations, refer to the page 16.)
3 Set the tape deck or VCR to the recording mode.
4 To monitor the audio and/or video signals being recorded, press the input selector switch for the audio or video tape recorder being used to make the recording.
Notes
●To dub from tape to tape, only the following method of dubbing can be performed.
SOURCE |
| RECORDER | |
|
|
| |
VCR (or tape deck) | → | Tape deck connected to | |
connected to the VCR | |||
the TAPE terminals. | |||
terminals. |
| ||
|
| ||
|
|
|
●DSP, VOLUME, BASS, TREBLE and BALANCE control settings have no effect on the material being recorded.
MONITORINPUT
VCR TAPE LD/TV TUNER CD PHONO
COPY
14