To play a source with the digital sound field processor

2

1

Follow steps 1 – 6 shown in “OPERATIONS” on page

 

13.

2

Turn the DSP on, so that a DSP program name

 

appears on the display.

 

EFFECT

 

CONCERT

 

HALL

3

Select the desired program that is suitable for the

 

source.

PROGRAM

PRO LOGIC

The selected program name is shown on the display.

4 If desired, adjust the delay time and the output level of each speaker. (For details, refer to the corresponding descriptions on the next page.)

3

Notes

●If you prefer to cancel the DSP, press the EFFECT switch again. The sound will be the normal 2-channel stereo without surround sound effect.

●In the CONCERT VIDEO, MONO MOVIE, ROCK CONCERT and CONCERT HALL modes, no sound is heard from the center speaker.

●When a monaural sound source is played in the DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED mode, no sound is heard from the front speakers and the rear speakers. Sound is heard only from the center speaker. However, if the center mode is in the PHANTOM, the front speakers output the sound of the center speaker.

●When this unit is in the Dolby Pro Logic Surround mode, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE controls, the relationship between the center and rear channels may produce an unnatural effect.

22