Yamaha RDX-E700 owner manual Recording Sources with External Components

RECORDING SOURCES WITH EXTERNAL COMPONENTS

If you connect an external recorder to the DVD receiver, you can record sources played back on the DVD receiver. For details on the connection methods, refer to “CONNECTING EXTERNAL COMPONENTS” (page 11).

Note

Make sure you read the manuals for your equipment to operate them.

Recording audio sources with the DVD receiver

If you connect the DIGITAL OPTICAL OUT jack on the DVD receiver to the optical digital input jack on an external recorder such as a CD recorder or MD recorder using optical cables (page 11), you can record audio sources from the DVD receiver.

Notes

•Radio stations are not output from the DIGITAL OPTICAL OUT jack. To record AM/FM broadcasts, use a commercially available audio cable to connect the AUX OUT L/R jack on the DVD receiver to the analog input jack on your recorder.

•Be sure to perform a test recording before an actual recording.

•Turning off the external recorder connected to the DVD receiver may distort playback sounds or reduce the volume. In this case, turn on the external recorder.

•The volume level and audio quality have no effect on the recorded sound during recording. However, if the input source is set to DVD/CD, the output sound for recording may cut off if the headphones are connected/disconnected.

•Depending on the recorder, some DTS software audio signals may not record properly.

•Audio recordings that you make cannot be used for any purpose other than private enjoyment without the consent of the copyright holder.

	STANDBY/ON			POWER
STANDBY/ON
				TV
(	)
	1	2	3	4

5 6 7 8

DIMMER SLEEP

9 0

–	NIGHT	–
EQ	TV	DVD/CD
TUNER	AUX	TUNER	Input
			selection
SUBTITLE	ANGLE ZOOM	AUDIO	buttons

1Turn on the recorder, then press

STANDBY/ON ( ) to turn on the DVD receiver.

2Use the Input selection buttons to select the input source.

3Start recording on the recorder, then start playback.

OPERATION ADVANCED

English

39