Yamaha RL RX-E100, RX-E100 MIN, MIN, HOUR, HOUR, INPUT, DISPLAY, DISPLAY, TIME ADJ, TIME ADJ, PRESET/ BAND, PRESET/ BAND, TIME ADJ PRESET/BAND

Setting the clock

You must set the clock before you use the timer functions. The clock is based on a 24-hour system for Australia and General models, and 12-hour system for US, Canada, and General models.

DISPLAY		HOUR		MIN
NATURAL SOUND STEREO RECEIVER RX-E100
					VOLUME
DISPLAY MEMORY	AUTO/MAN'L	PRESET/BAND	PRESET/TUNING
				MIN	MAX
TIME ADJ	TIMER	HOUR		MIN	INPUT
STANDBY/ON PHONES		BASS	TREBLE	BALANCE
		- +	- +	L R

TIME ADJ PRESET/BAND

1While the power is on, press DISPLAY to display the time.

2While holding TIME ADJ, press HOUR to set the hour.

•If you want to move the time in the reverse direction, press HOUR while holding TIME ADJ and PRESET/ BAND.

3While holding TIME ADJ, press MIN to set the minutes.

•If you want to move the time in the reverse direction, press MIN while holding TIME ADJ and PRESET/ BAND.

To display the clock

Press DISPLAY.

The current time appears for about 8 seconds, then the normal display returns.

Note

•In the event of a power failure or when the AC power cord is disconnected for more than five minutes, you must reset the clock.

USING THE BUILT-IN TIMER

Adjusting the brightness

of the display

You can adjust the brightness of the display. If you have connected the CD player (CDX-E100), cassette deck (KX-E100), and/or MD recorder (MDX-E100) to this unit, the brightness of the displays is automatically adjusted to that of this unit.

DISPLAY

NATURAL SOUND STEREO RECEIVER RX-E100

VOLUME

DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING

MINMAX

	TIME ADJ	TIMER	HOUR		MIN	INPUT
STANDBY/ON	PHONES		BASS	TREBLE	BALANCE

- + - + L R

INPUT

Press and hold DISPLAY for about two seconds so that “Dimmer ±0” appears on the display. While holding DISPLAY, turn INPUT clockwise to increase or counterclockwise to decrease brightness.

Control Range: ±0 to –6 (Preset value: ±0)

English

E-11