Yamaha RX-V363 owner manual 45 En, Speaker settings Aspeaker SET

1 SOUND MENU

Use this menu to manually adjust any speaker settings or compensate for video signal processing delays when using LCD monitors or projectors.

■Speaker settings A)SPEAKER SET

Use this feature to manually adjust any speaker settings.

FRONT B speaker setting FRONT B

Use this feature to select the location of the front speakers connected to the FRONT B terminals.

Choices: FRONT, ZONE B

•Select “FRONT” to turn FRONT A and B on and off when the FRONT B speakers are set in the main zone.

•Select “ZONE B” if the speakers connected to the FRONT B terminals are set in another zone. If FRONT A is turned off and FRONT B is turned on, all the speakers including the subwoofer in the main zone are muted and this unit outputs sound at the FRONT B terminals only.

Notes

•If you connect headphones to the PHONES jack on this unit, the sound is output from both headphones and the FRONT B terminals when “FRONT B” is set to “ZONE B”.

•If a DSP program is selected when “FRONT B” is set to “ZONE B”, this unit automatically enters the Virtual CINEMA DSP mode (see page 36).

Set menu

Woofer section of a speaker is 16 cm (6.5 in) or larger: large

Woofer section of a speaker is smaller than 16 cm (6.5 in): small

Front speakers FRONT

Choices: LARGE, SMALL

When the front speakers are large

Select “LARGE” (large).

When the front speakers are small

Select “SMALL” (small).

Note

When “BASS OUT” is set to “FRNT” (see page 46), you can select only “LARGE” in “FRONT”. If the value of “FRONT” is set to a setting other than “LARGE” in advance, this unit automatically changes the value to “LARGE”.

Center speaker CENTER

Choices: NONE, SML, LRG

When the center speaker is large

Select “LRG” (large).

When the center speaker is small

Select “SML” (small).

When you do not use the center speaker

Select “NONE” (none). The center channel signals are directed to the front left and right speakers.

Surround left/right speakers SUR. LR Choices: NONE, SML, LRG

When the surround speakers are large

Select “LRG” (large).

When the surround speakers are small

Select “SML” (small).

When you do not use the surround speakers

Select “NONE” (none). This unit is set to the Virtual CINEMA DSP mode (see page 36).

OPERATION ADVANCED

English

45 En