BASIC PLAYBACK

4 Start playback or select a broadcast station on the source component.

Refer to the operation instructions for the component.

5 Adjust the volume to the desired level.

The volume level is displayed digitally.

Example: –70 dB

Control range: VOLUME MUTE (minimum) to

0 dB (maximum)

The volume level indicator also shows the current volume level as a bar graph.

If desired, use BASS and TREBLE. These controls only effect the sound from the main speakers.

VOLUME

or

BGV (background video) function

The BGV function allows you to enjoy video images from a video source together with sounds from an audio source. For example, you can enjoy listening to classical music while having beautiful scenery from a video source on the video monitor.

Select a source from the video group, then select a source from the audio group using the input selector buttons on the remote control. BGV selections cannot be made with INPUT l/ hon the front panel.

DVD D-TV/CBL VCR

V-AUX

CD TUNER MD/CD-R

To mute the sound

BASS TREBLE

VOLUME

1 Press MUTE on the

MUTE

Remote control

+ +

Front panel

Notes

If you increase or decrease the high-frequency or the low- frequency sound to an extreme level, the tonal quality from the center and rear speakers may not match that of the main left and right speakers.

If you have connected a recording component to the VCR OUT, or MD/CD-R OUT jacks, and you notice distortion or low volume during playback of other components, try turning the recording component on.

6 Select a DSP program if desired.

Use PROGRAM l/ h(DSP program buttons on the remote control) to select a DSP program. See pages 29 to 33 for details about DSP programs.

 

 

PROGRAM

 

 

HALL

JAZZ

ROCK

 

CLUB

CONCERT

 

ENTER-

TV

MONO

PROGRAM

TAINMENT

SPORTS

MOVIE

or

 

 

 

 

 

 

MOVIE

q/ DTS

 

1 – THEATER – 2

SUR.

 

MATRIX

 

 

 

6.1

 

SELECT

Front panel

Remote control

remote control.

To resume the audio output, press MUTE again.

y

You can also cancel mute by pressing VOLUME h/g, etc.

During muting, the “MUTE” indicator flashes on the front panel display.

When you have finished using this unit

1 Press STANDBY/ON (POWER on the remote control) to set this unit in the standby mode.

 

P O W E R

STANDBY

or

/ON

 

Front panel

Remote control

24