ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS

You can adjust the output level of each effect speaker (center, rear left and right, and subwoofer) while listening to a source.

Adjustment should be made with the remote control.

1

LEVEL

SET MENU

 

 

 

 

1

+

 

 

DSP

 

 

TEST

STEREO

 

 

 

EFFECT

2

 

MUTE

 

VOLUME

2 Press +/– to adjust the speaker output level.

The control range for the center or rear left and right speakers is from +10 dB to –10 dB.

The control range for the subwoofer is from 0 dB to –20 dB.

+

DSP

Notes

When the speaker output modes for “1A CENTER” and “1C REAR LR” are set to NON, and “1D BASS” to MAIN, the output level of those speakers cannot be adjusted because there is no sound coming from these speakers.

When you adjust the output level with LEVEL, the settings you made with the test tone will be changed.

We recommend adjusting the speakers by following the steps described in “Using the test tone” on pages 21 and 22.

(While playing a source)

1 Press LEVEL repeatedly to select the speaker(s) you want to adjust.

Each time you press LEVEL, the selected speaker changes and appears on the front panel display as follows: center, rear right, rear left and subwoofer.

LEVEL

Center speaker output level

Rear right speaker output level

Rear left speaker output level

Subwoofer output level

For 5ch Stereo

You can adjust the volume level for each channel in 5- channel stereo mode.

Control range: 0 to 100%

CT level (Center level)

RL level (Rear left level)

RR level (Rear right level)

1 Select 5ch Stereo.

2 Press u / drepeatedly to select the speaker(s) you want to adjust.

3 Press +/– to adjust the speaker output level.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If so, set the output level again.

OPERATION

ADVANCED

 

 

y

Once you press LEVEL, you can also select the speaker(s) to be adjusted by pressing d/ u.

LEVEL

+

DSP

English

47