TUNING OPERATIONS

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).

1

2 3

AUTOMATIC TUNING

1 Select the reception band (FM or AM) while watching the display.

FM/AM

FM or AM

2 TUNING MODE

AUTO TUNING

AUTO/

3

DOWN

TUNING

UP

 

To tune to a higher frequency, press the right side once. To tune to a lower frequency, press the left side once.

*If the station where tuning search stopped is not the desired one, press again.

*If the tuning search does not stop at the desired station (because the signals of the station are weak), change to the MANUAL TUNING method.

MANUAL TUNING

1 Select the reception band (FM or AM) while watching the display.

FM/AM

FM or AM

2 TUNING MODE

 

“AUTO TUNING”

AUTO/ MONO

goes off.

 

3 Tune to a desired station manually.

DOWN TUNING

UP

 

 

 

 

* To continue tuning search, press and hold the button.

Note

If you tune to an FM station manually, it is received in monaural mode automatically to increase the signal quality.

Display information

➀➁

STEREO

➂

FM

MHz 0 20 40 60 l00

➀Displays the band and frequency of the received station.

➁ Illuminates when an FM stereo broadcast is received in

stereo.

➂ Indicates the signal level of the received station.

16