JMEMORY (MAN’L/AUTO FM) button

When this button is pressed, the MEMORY indicator flashes for about 5 seconds. During this period, select a desired preset station number by pressing the corresponding preset station number selector button to enter the displayed station into the memory.

When this button is pressed and held for about 3 seconds, the automatic preset tuning begins. (Refer to page 28 for details.)

KEDIT button

This button is used to exchange the places of two preset stations with each other.

LTUNING DOWN/UP button

Used for tuning. Press the “UP” side to tune in to higher frequencies, and press the “DOWN” side to tune in to lower frequencies.

When this unit is in the PTY SEEK mode, pressing this switch changes the currently selected program type.

MTUNING MODE (AUTO/MAN’L MONO) button Press this button to switch the tuning mode to automatic or manual. To select the automatic tuning mode, press this button so that “AUTO” lights up on the display. To select the manual tuning mode, press this button so that “AUTO” goes off.

NDELAY/CENTER/REAR and TIME/LEVEL +/– buttons RX-V492RDS only

Adjust the delay time (DELAY), the center channel output level (CENTER) and the rear channel output level (REAR).

Select the item which you want to adjust by pressing the DELAY/CENTER/REAR button and adjust its time or level by pressing the TIME/LEVEL +/– button.

OCENTER MODE button

Selects a center channel output mode (NORMAL, WIDE or PHANTOM). (For details, refer to page 21.)

PPROGRAM selector button RX-V392RDS only

When the built-in digital sound field processor (including the Dolby Pro Logic Surround decoder) is on, this button changes the currently selected DSP program whenever the right or left side of this button is pressed.

QCENTER LEVEL control RX-V392RDS only

Adjusts the sound output level of the center speaker.

RREAR LEVEL control RX-V392RDS only

Adjusts the sound output level of the rear speakers.

16