SPEAKER SETUP
SPEAKERS TO BE USEDThis unit is designed to provide the best
The main speakers are used for the main source sound plus the effect sounds. They will probably be the speakers from your present stereo system. The rear speakers are used for the effect and surround sounds, and the center speaker is for the center sounds (dialog etc.) within programs encoded with Dolby Surround. The center speaker needs to be equal in power to the main speakers, although the rear speakers should not be equal. However, all the speakers should have high enough power handling to accept the maximum output of this unit.
SPEAKER CONFIGURATIONEnglish
This configuration is the most effective and recommended one. In this configuration, the center speaker is necessary as well as the rear speakers. If the program DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED is selected, conversations will be output from the center speaker and the ambience will be excellent.
•Set the center channel mode to the “NORMAL” or “WIDE” position. (For details, refer to page 21.)
The center speaker is not used in this configuration. If the program DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED is selected, the center sound is output from the left and the right main speakers. However, the sound effect of other programs can be the same as that of the
•Be sure to set the center channel mode to the “PHANTOM” position. (For details, refer to page 21.)
Main L | Center | Main R |
| Main L |
| Main R |
Dialogue
Dialogue
Surround sound | Surround sound | ||
Rear L | Rear R | Rear L | Rear R |
The recommended speaker configuration, the
Main R
Center
Main L
TV set
Rear R
Main: In normal position. (The position of your present stereo speaker system.)
Rear: Behind your listening position, facing slightly inward. Nearly six feet (approx. 1.8 m) up from the floor.
Center: Precisely between the main speakers. (To avoid interference with TV sets, use a magnetically shielded speaker.)
Rear L
7