To listen to a decoded source using Dolby Digital (AC-3) or DTS by reproducing the signals input to the 6CH DISCRETE INPUT terminals of this unit.

In step 3, press the button (shown below) once or more so that “6ch” appears on the display.

Discrete signals from the unit connected to the 6CH DISCRETE INPUT terminals of this unit are selected as the input signals.

RX-V493RDS

TV/DBS

DVD/LD

 

 

TV/DBS

DVD/LD

 

 

 

 

 

 

 

 

or

 

TAPE/MD MON

2CH/6CH

MON

2CH/6CH

RX-V393RDS

VCRVIDEO

To cancel listening to a decoded source using Dolby Digital (AC-3) or DTS

Press the same button again or select another input source.

Note for reproducing discrete signals with Dolby Digital (AC-3) or DTS decoded:

1.Your speaker system must include a center speaker.

2.Your speaker system must include a subwoofer.

*Connect a subwoofer which has a built-in amplifier to the SUBWOOFER OUTPUT terminal of this unit.

*You can do without using a subwoofer. If you do so, you should make a setting for distributing signals at the LFE channel to the right and left MAIN output terminals on the Dolby Digital (AC-3) Decoder etc.

For details, refer to the owner’s manual for the Dolby Digital (AC-3) Decoder etc.

Notes

●When you switch to the “6ch” mode, the built-in Digital Sound Field processor will not work and adjustment of delay time cannot be made.

●Switching this unit to the “6ch” mode will input no signal to this unit if there is no connection to the 6CH DISCRETE INPUT terminals of this unit.

2CH/6CH

26