ADJUSTING SPEAKER OUTPUT LEVELS
LEFT RIGHT
CENTER
*SUBWOOFER
LEFT SURROUND RIGHT SURROUND
REAR CENTER
*Subwoofer test tone is output after the rear left speaker (LEFT SURROUND).
The front panel display shows which speaker is outputting the test tone.
Note
•If the test tone cannot be heard, turn down the volume, set this unit to standby mode and check the speaker connections.
4 Adjust the level of the |
| PRESET/CH |
|
effect speakers using j / i |
|
|
|
so that it matches the | – | SELECT | + |
| |||
level of the main |
|
|
|
speakers. |
|
|
|
While adjusting, the test tone is heard from the selected speaker.
Note
•To adjust the level of the main speakers, use VOLUME knob (or VOLUME +/– on the remote control).
5 When adjustment is | TEST |
complete, press TEST to | RETURN |
stop the test tone. |
|
Notes
•If “1A CENTER” on the SET MENU is set to NON, the center channel sound is automatically output from the main left and right speakers.
•If “1C REAR LR” on the SET MENU is set to NON, the output level of the rear left, right and center speakers cannot be adjusted in step 4. The test tone will be circulated skipping the rear left and right speakers and the rear center speaker.
•If “1D REAR CT” on the SET MENU is set to NON, the output level of the rear center speaker cannot be adjusted in step 4. The test tone will be circulated skipping the rear center speaker.
•If “1E BASS” on the SET MENU is set to MAIN, the test tone will be circulated skipping the subwoofer.
y
•It is not necessary to readjust the speaker levels once they are set (as long as you do not change the speakers). You can enjoy listening to or watching the input source at the desired volume simply by adjusting the VOLUME knob (or VOLUME +/– on the remote control).
•If the output level of the effect speakers (center, rear left, rear right, and rear center) cannot be increased enough to match the level of the main speakers, set “1F MAIN Lv” on SET MENU to
22