REMOTE CONTROL FEATURES
Setting the manufacturer code
You can control other components by setting a manufacturer code. Codes can be set for each of the 9 component controls.
The following table shows
Component | Component category | Manufacturer | Code |
control | (Library) |
|
|
(buttons) |
|
|
|
|
|
|
|
CD | CD | YAMAHA | 0005 |
|
|
|
|
MD | YAMAHA | 0024 | |
|
|
|
|
TUNER | TUNER | YAMAHA | 0003 |
|
|
|
|
DVD | DVD | YAMAHA | 0098 |
|
|
|
|
– | – | – | |
|
|
|
|
– | – | – | |
|
|
|
|
VCR 1 | – | – | – |
Clearing setup manufacturer
codes
■Clearing setup manufacturer code for the component control
1 Press an input selector button or ★★ to select the component control for which you want to clear the manufacturer code.
CD
DVD
VCR 1 VCR2/DVR
2 Press CODE SET by using a ballpoint pen or similar object.
The TRANSMIT indicator flashes twice.
VCR 2/DVR | – | – | – |
★★ | – | – | – |
CODE SET
Note
TRANSMIT
1 Press an input selector button or ★★ to select the component you want to set up.
CD
DVD
VCR 1 VCR2/DVR
2 Press CODE SET using a ballpoint pen or similar object.
The TRANSMIT indicator flashes twice.
TRANSMIT
CODE SET
3 Press the numeric buttons to enter the four digit manufacturer’s code for the component to be used.
Refer to “LIST OF MANUFACTURER’S CODES”
at the end of this manual.
HALL | JAZZ CLUB | ROCK | ENTER- |
CONCERT | TAINMENT | ||
1 | 2 | 3 | 4 |
MUSIC | TV | MOVIE | MOVIE |
VIDEO | THEATER | THEATER 1 THEATER 2 | |
5 | 6 | 7 | 8 |
/DTS | NIGHT | 6.1/5.1 | STEREO |
SUR. | |||
9 | 0 | +10 | ENTER |
EFFECT
The TRANSMIT indicator flashes twice.
Notes
•If the manufacturer of your component has more than one code, try each of them until you find the correct one.
•If you wait for more than 30 seconds during step 3, the setup process cancels. If this happens, start again from step 2.
•If you do not press any button within 30 seconds after step 2, the clearing process cancels. If this happens, start again from step 1.
3 Enter the code number “0000”.
The TRANSMIT indicator flashes twice, and the manufacturer code for the selected component is cleared.
y
•You can clear all setup manufacturer codes at once by entering the code number “9990”.
48
