Manuals / Brands / Home Audio / Stereo Receiver / Yamaha / Home Audio / Stereo Receiver

Yamaha RX-V670 Adjusting the BALANCE control, Selecting the SPEAKER system, Adjusting the BASS and TREBLE controls, When you listen with headphones, OFF, Note, BASS, Note

1 30

Download 30 pages, 2.09 Mb

Adjusting the BALANCE control

Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.

BALANCE

0

L 5

5 R

Note

This control is effective only for the sound from the front speakers.

Selecting the SPEAKER system

Because one or two speaker systems (as front speakers) can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once.

SPEAKERS

Adjusting the BASS and TREBLE controls

BASSTREBLE

00

— 5

5 +

— 5

5 +

BASS : Turn this clockwise to increase (or counterclockwise to decrease) the low frequency response.

TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency response.

Note

These controls are effective only for the sound from the front speakers.

When you listen with headphones

Connect the headphones to the PHONES jack. You can listen to the main sound through headphones. When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position.

PHONES

15

Contents

OWNER’S MANUAL CONTENTS Note to CATV system installer: CAUTION: READ THIS BEFORE OPERATING YOUR UNIT FCC INFORMATION We Want You Listening For A Lifetime SUPPLIED ACCESSORIES PROFILE OF THIS UNIT Digital Sound Field Processing Dolby Pro Logic Surround “ENHANCED” Dolby Pro Logic Surround SPEAKER SETUP FOR THIS UNIT SPEAKERS TO BE USED SPEAKER CONFIGURATION 5-SpeakerConfiguration 4-SpeakerConfiguration CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS CONNECTING SPEAKERS ABOUT THE ACCESSORY TERMINALS AC OUTLETS REMOTE CONTROL (PHONO) connector GND terminal (For turntable use) ANTENNA CONNECTIONS Connecting the AM loop antenna ADJUSTMENT BEFORE OPERATION Speaker balance adjustment REMOTE CONTROL TRANSMITTER SPEAKER CONFIGURATION Note For 5 speaker configuration) NORMAL: CENTER LEVEL REAR LEVEL FRONT EFFECT LEVEL MASTER VOLUME OPERATIONS Display Tuner controls PHONES jack To play a source To record a source to tape Adjusting the BALANCE control Selecting the SPEAKER system Adjusting the BASS and TREBLE controls TUNING OPERATIONS AUTOMATIC TUNING MANUAL TUNING Display information PRESET TUNING To program stations To recall a preset station Memory back-up USING DIGITAL SOUND FIELD PROCESSOR (DSP) Description of Each Sound Field Program Notes on Operation of Sound Field Programs Description of Dolby Pro Logic Surround To play a source with the digital sound field processor Adjustment of DELAY TIME Adjustment of the FRONT EFFECT LEVEL Adjustment of the CENTER LEVEL Adjustment of the REAR LEVEL SETTING THE SLEEP TIMER To set the SLEEP time To cancel the selected SLEEP time REMOTE CONTROL TRANSMITTER KEY FUNCTIONS For Control of This Unit For Other Component Control REMOTE CONTROL “LEARNING” FUNCTION To Learn a New Function To Clear a Learned Function To Clear All Learned Functions NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range Battery replacement TROUBLESHOOTING SPECIFICATIONS BLOCK DIAGRAM