ADJUSTING SPEAKER OUTPUTCONNECTIONSLEVEL

LEFT RIGHT

CENTER

*SUBWOOFER

4 Adjust the level of the effect speakers using j / i so that it matches the level of the main speakers.

While adjusting, the test tone is heard from the selected speaker.

Note

+

TV VOL

CH

TV MUTE

CH

–

+

SELECT

 

 

PRESET

 

TV VOL

 

 

–

 

LEFT SURROUND RIGHT SURROUND

REAR CENTER

*Subwoofer test tone is output after the rear left speaker (LEFT SURROUND).

For your convenience, the state of the test tone output is also shown on the monitor by an image of an audio listening room.

TEST DOLBY SUR.

L E F T

The front panel display also shows which speaker is outputting the test tone.

Note

•If the test tone cannot be heard, turn down the volume, set this unit to standby mode and check the speaker connections.

•To adjust the level of the main speakers, use VOLUME knob (or VOL +/– on the remote control).

5 When adjustment is

TEST

complete, press TEST to

RETURN

stop the test tone.

 

Notes

•If “1A CENTER” on the SET MENU is set to NON, the center channel sound is automatically output from the main left and right speakers.

•If “1C REAR LR” on the SET MENU is set to NON, the output level of the rear left, right and center speakers cannot be adjusted in step 4. The test tone will be circulated skipping the rear left and right speakers and the rear center speaker.

•If “1D REAR CT” on the SET MENU is set to NON, the output level of the rear center speaker cannot be adjusted in step 4. The test tone will be circulated skipping the rear center speaker.

•If “1E BASS” on the SET MENU is set to MAIN, the test tone will be circulated skipping the subwoofer.

y

•It is not necessary to readjust the speaker levels once they are set (as long as you do not change the speakers). You can enjoy listening to or watching the input source at the desired volume simply by adjusting the VOLUME knob (or VOL +/– on the remote control).

•If the output level of the effect speakers (center, rear left, rear right, and rear center) cannot be increased enough to match the level of the main speakers, set “1F MAIN Lv” on the SET MENU to –10 dB (see page 44). This setting decreases the main speaker output level to about one-third of the normal level. After you have set “1F MAIN Lv” on the SET MENU to

–10 dB, adjust the levels for the center and rear speakers again.

PREPARATION

23