ADVANCED FEATURES
mFunction description
1. | CENTER SPEAKER | 3. | MAIN SPEAKER | 5. MAIN LEVEL |
2. | REAR SPEAKER | 4. | LFE/BASS OUT |
|
(Selecting the output modes suitable for your speaker system)
Refer to pages 27 to 29 for details. (Once you have selected proper modes, you do not have to make a setting change, unless your speaker system is modified.)
6.DOLBY DGTL SET
LFE LEVEL [Adjusting the output level at the LFE (low frequency effect) channel]
● | Control range: | Adjusts the output level at the LFE (low frequency effect) | |
| Preset value: 0 dB | channel. If the LFE signals are mixed with signals of other | |
● | This adjustment is effective only when Dolby Digital is | channels and they are output from the same speakers, the ratio | |
of LFE signals to other signals can be adjusted. (Refer to page 5 | |||
| decoded and the signals of the selected source encoded | ||
| for details about the LFE channel.) | ||
| with Dolby Digital contain LFE signals. | ||
|
|
English
7.DOLBY DGTL SET
DYNAMIC RANGE (Adjusting dynamic range)
●Choices: MAX/STD/MIN
Preset position: MAX
●This adjustment is effective only when Dolby Digital is decoded.
“Dynamic range” is the difference between the maximum level and the minimum level of sounds. Sounds on a movie originally designed for movie theaters feature very wide dynamic range.
Dolby Digital technology can bring the original sound track into a home audio format with this wide dynamic range unchanged. Powerful sounds of extremely wide dynamic range are not always suitable for home use. Depending upon the condition of your listening environment, it may not be possible to increase the sound output level as high as a movie theater. However, in a level suitable for listening in your room, the low level parts of source sound cannot be heard well because they will be lost among noises in your environment.
Dolby Digital technology also made it possible to reduce an original sound track’s dynamic range for a home audio format by “compressing” the data of sound.
MAX: In this position, a source encoded with Dolby Digital is reproduced in the original sound track’s wide dynamic range providing you with powerful sounds like a movie theater.
Selecting this position will be more ideal if you can listen to a source in a high output level in a room specially soundproofed for audio/video enjoyment.
STD (Standard):
In this position, a source encoded with Dolby Digital is reproduced in the “compressed” dynamic range of the source suitable for low level listening.
MIN: In this position, dynamic range is more reduced than in the STD position. Selecting this position will be effective when you must listen to a source in an extremely low level.
*In this position, it may happen that sound is output faintly or not output normally depending on a source. In that case, select the MAX or STD position.
57