SET MENU
Depending on the item, press u/dto select a sub item.
2 LOW FRQ TEST
TEST TONE • • • • • OFF
OUTPUT • • • MAIN L/R
FRQ • • • • • • • • • 88Hz
5 Press j / i repeatedly to change the setting of the item.
2 LOW FRQ TEST
TEST TONE • • • • • •ON
OUTPUT • • • MAIN L/R
FRQ • • • • • • • • • 88Hz
6 Press u/d repeatedly until the current DSP program appears or simply press one of the DSP program group button to exit from the
SET MENU.
or
Memory
The memory
1SPEAKER SET (speaker mode settings)
Use this feature to select suitable output modes for your speaker configuration. You must set the output mode when you use a subwoofer.
Notes
•When
•When 6CH INPUT is selected as the input source, level adjustments in items 1A through 1E are not affected.
■1A CENTER SP (center speaker mode)By adding a center speaker to your speaker configuration, the unit can provide good dialog localization for many listeners and superior synchronization of sound and images. The OSD shows a large, small or no center speaker depending on how you set this item.
Choices: LRG (large), SML (small), NONE
Initial setting: LRG
LRG
Select this if you have a large center speaker. The entire range of the center channel signal is directed to the center speaker.
1A CENTER SP
LRG SML NONE
SML
Select this if you have a small center speaker. The low- frequency signals (90 Hz and below) of the center channel are directed to the speakers selected with “1D LFE/BASS OUT”.
1A CENTER SP
LRG SML NONE
40