39
Basics Section
1After pressing the [MULTI] button, press the
[EDIT] button (the respective LEDs will light). You
are now in the Multi Edit mode.
nBefore entering the Multi Edit mode, you need to select a
Multi for editing.
2If the Common Edit display is shown, press the [+]
or [–] button to switch to the Part Edit display.
3Use the [+] and [–] buttons to select Parts. Here,
you can select P2 (Part 2) for the piano, P3 (Part 3)
for bass and P10 (Part 10) for drums. First, let’s
select P2 (Part 2).
4Use the [▲] and [▼] buttons to switch to the Voice
Selection screen (PAGE 1), then specify the Voice to
be used as the piano Part.
5Next, use the [▲] and [▼] buttons to switch to the
Volume screen (PAGE 2), then set the volume for
the piano Part as well as its Pan position, Chorus
and Reverb Send levels, if necessary. For details, see
page 56.
6Continue using the [▲] and [▼] buttons and switch
to the Rcv Ch (MIDI Receive Channel) screen
(PAGE 6). Set the parameter to 2.
7Use the [▲] and [▼] buttons and switch to the
Mono/Poly screen (PAGE 8). Set the parameter to
“poly” (polyphonic).
nFor Parts that do not require polyphony, the Mode
parameter can be set to “mono” (monophonic).
8Use the [▲] and [▼] buttons and switch to the Part
Mode screen (PAGE 9). Set the parameter to
“norm” (normal).
nIn the case of a Drum Part, set the mode to “drum.”
nFor details about the Part mode, see page 61.
MODE
MULTI
UTILITY
EDIT
COMPARE
JOB STORE
MIDI
VOICE DEMO
PART ELEMENT KEY
MUTE
COMMON
KEYELEMPART
OCTAVE
PAGE
2 E
KEYELEMPART
OCTAVE
PAGE
2 P
Common indicator
Part indicator
Total Vol
127
Volume
100
PART ELEMENT KEY
MUTE
COMMON
KEYELEMPART
OCTAVE
PAGE
1 P 2
GrandPno
XG001
KEYELEMPART
OCTAVE
PAGE
2
Volume
001
KEYELEMPART
OCTAVE
PAGE
6 P 2
Rcv Ch
02
KEYELEMPART
OCTAVE
PAGE
8 P 2
Mono/Poly
poly
KEYELEMPART
OCTAVE
PAGE
9 P 2
Part Mode
norm