Yamaha Soavo-2 PLACING THE SPEAKERS, ■Using as front speakers in a multi channel system, Yamaha speaker stand SPS-900(option), 2En, ■Using as 2ch stereo speakers, Note, Notes

PLACING THE SPEAKERS

Place the speakers on a sturdy, vibration-free surface, or on a well-built stand.

■Using as 2ch stereo speakers

Better stereo images will be obtained when the speakers are slightly angled in towards the listeners.

■Using as front speakers in a multi channel system

Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the speakers on the basis of your listening position by following the owner’s manual supplied with your amplifier.

Speaker layout image

Soavo-2

Subwoofer

Center

Surround

Note

Placing this unit too close to a TV set might impair picture color or create a buzzing noise. Should this happen, move the speaker away (more than 20 cm (7-7/8”)) from the TV set.

Yamaha speaker stand SPS-900 (option)

You can use this unit as a floor stand speaker when installing on an SPS-900.

In this case, use screw holes on the bottom of this unit.

•For details about installing, refer to the assembly instruction of SPS-900.

Bottom view (Front side)

	135 mm (5-5/16”)	Screw holes
	135 mm (5-5/16”)	Diameter: 4 mm (5/32”)
		Diameter: 4 mm (5/32”)
		Hole depth: 13 mm (1/2”)

Yamaha speaker

stand SPS-900

Notes

•To avoid accidents resulting from tripping over loose speaker cables, fix them to the floor.

•Do not fasten the speaker on the stand with nails or adhesives, etc. Long time use and vibrations may cause this unit to fall down.